DSL-100

Back to Enerstat Slimline Digital Thermostats

HEAT ONLY, 2 WIRE CONTROLLER

GENERAL DESCRIPTION

The DSL-100 controller is designed for new or replacement heat only applications. The DSL-100 represents the latest in solid-state surface mount electronics and manufacturing techniques incorporated into a extremely low profile, ultra-slim white ABS plastic case. The DSL-100 offers "user friendly" control of heating equipment along with an easy-to-read vertical LCD that displays complete operations status. A direct-wire, easy to-install subbase mounts on a standard vertical outlet box or any dry wall surface using anchors and hardware provided.

STANDARD FEATURES
  • Selectable Celsius or Fahrenheit temperature display.
  • Built-in short cycle protection.
  • Electronic circuitry replaces conventional mechanical anticipator.
  • Internal switch to lock-out the keypad to prevent unauthorised tampering.
  • Solid state electronic output.
  • Does not require a battery (always maintains the last setpoint and mode of operation following power outages of any duration.)
  • Built-in anticipation.
  • Minimum On/Off Times - 2 or 4 minutes selectable.
  • High temperature thermal cut-off switch.
  • Lockable access cover.


    • SPECIFICATIONS
    Rated Voltage 20-30 Vac, 24 nominal
    Rated Current 0.08 Amps to 1.5 Amps continuous per output with surges to 4 Amps Max.
    Controller measurement range 0 to 48 C
    Control Accuracy ± 0.5 C At 20 C
    Dimensions: 114mm x 102mm x 22mm
    Termination: R, W
    Minimum wires required 2

    OUTPUT TERMINAL FUNCTIONS

    RH 24 Vac Supply from heating equipment
    W Heat energised with a heating call
    - Equipment load resistors (provided) may may be required on the "W" switching circuit if the equipment loads do not draw a minimum of 0.08 amps.
    - Connect load resistors at the equipment.

    Back to Enerstat Slimline Digital Thermostats